Bangle and Ring

  • Advertise with us
Project by pommy posted 06-20-2009 11:32 PM 2236 views 3 times favorited 10 comments Add to Favorites Watch

Hi Guys its been awhile since i put something on here so i spent the day making the wife a new bangle and ring its made from teak that i had left over from the doors i posted awhile back i haven’t got a lathe so i had to improvise abit so the ring i used a 20mm forstner for the center and i used a hole saw oversized to make the ring and sanded back to size as for the bangle again i used hole saw to make it then sand back to size then i teak waxed them both to bring out the grain then finished with two coats of gloss varnish

Well i hope you like and all criticism wellcome


-- cut it saw it scrap it SKPE: ANDREW.CARTER69

10 comments so far

View patron's profile


13646 posts in 3673 days

#1 posted 06-20-2009 11:40 PM

looks good pommy .
keep the missus happy ,
good project for a rainy day ,
like it is here today .

did she say yes ?

-- david - only thru kindness can this world be whole . If we don't succeed we run the risk of failure. Dan Quayle

View degoose's profile


7255 posts in 3687 days

#2 posted 06-20-2009 11:42 PM

Raining here too, Off to the local markets to see whats what.
Fancy ring and bangle, good use of off cuts and I like the method.

-- Don't drink and use power tools @

View a1Jim's profile


117603 posts in 3909 days

#3 posted 06-21-2009 12:23 AM

Hey Andy
Down right pretty very well done.

Hey Dave and Larry How about making a ring with the Lazy Larry pattern?

View CharlieM1958's profile


16282 posts in 4550 days

#4 posted 06-21-2009 01:51 AM

Nice job, Andy. That teak looks great.

-- Charlie M. "Woodworking - patience = firewood"

View scrappy's profile


3507 posts in 3762 days

#5 posted 06-21-2009 03:15 AM

Nice job. Love the 2 piece set. Got to make a bracelet to go with the wifes ring now.

Nice use of scraps.

Very well done. Keep it up.


-- Scrap Wood's the best...the projects are smaller, and so is the mess!

View tomakazi's profile


686 posts in 3615 days

#6 posted 07-16-2009 09:16 PM

They look great Andy.

-- I didn't go to college, I was too busy learning stuff - Ted Nugent

View janice's profile


1120 posts in 3757 days

#7 posted 01-03-2010 07:07 AM

I like wood jewelry, dang it. I should learn how to do this. Just a hole saw, huh? I should try this someday. I don’t have a lathe eiither. It looks very nice.

-- Janice

View Skylark53's profile


2697 posts in 3392 days

#8 posted 01-19-2010 11:07 AM

Well I hadn’t thought of making a ring like that! I really like it. Very nice. Thanks for sharing.

-- Rick, Tennessee, John 3:16

View pommy's profile


1697 posts in 4023 days

#9 posted 01-19-2010 11:13 AM

Thank you for all the kind comments

-- cut it saw it scrap it SKPE: ANDREW.CARTER69

View Sam Shakouri's profile

Sam Shakouri

1200 posts in 3420 days

#10 posted 03-25-2010 09:05 PM

Nice wooden jewelleries, and the way you made them is very clever. Andy.

-- Sam Shakouri / CREATING WONDERS WITH WOOD.....Sydney,Australia....

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics