LumberJocks

Ring container with lid

  • Advertise with us
Project by papabear posted 06-01-2009 02:41 AM 1310 views 0 times favorited 4 comments Add to Favorites Watch

Was reading through a turning book and saw an exercise for a lidded bow. I didn’t have any stock big enough to make one with their pattern but with what I had a container for my wife to put her rings in at night came to mind.

I added the coins to the picture to give an idea of size.

I think the wood is maple. Any ideas on what I should finish it with? I think I’ll glue some felt on the inside to protect the rings.

-- Do not meddle in the affairs of dragons for you are crunchy and taste good with ketchup.





4 comments so far

View lew's profile

lew

13431 posts in 5004 days


#1 posted 06-01-2009 03:04 AM

Perhaps a few coats of wipe on Poly.

Nice Job! I think turning the smaller things are harder than the larger ones.

-- Lew- Time traveler. Purveyor of the Universe's finest custom rolling pins.

View a1Jim's profile

a1Jim

118267 posts in 4826 days


#2 posted 06-01-2009 03:06 AM

Nice turning looks great

-- https://www.artisticwoodstudio.com/videos

View Jim's profile

Jim

254 posts in 4894 days


#3 posted 06-01-2009 04:11 AM

Hey Rick. I would use multiple coats of thin shelac with flocking for the interior. Beautiful job! Make sure you post finished photos so we can see the end result.

-- Jim in Langley BC Canada --- www.sollows.ca

View papabear's profile

papabear

87 posts in 4595 days


#4 posted 06-01-2009 04:23 AM

is flocking a spray in covering? I have heard you mention it before but don’t recall how it is applied.

-- Do not meddle in the affairs of dragons for you are crunchy and taste good with ketchup.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com