Shoulder Planes (Plane Swap 2015)

  • Advertise with us
Project by Mosquito posted 08-05-2015 04:21 PM 3722 views 10 times favorited 24 comments Add to Favorites Watch

These were the two shoulder planes I made for the 2015 Plane and Spokeshave Swap

The smaller one uses a medium Wood River shoulder plane blade, and the larger is using a Lie-Nielsen replacement (large) shoulder plane iron.

Smaller plane is curly walnut and cherry with a padauk wedge. The larger plane is maple and walnut, with oak dowels.

-- Mos - Twin Cities, MN - -

24 comments so far

View August McCormick Lehman III's profile

August McCormick Lehman III

1811 posts in 2571 days

#1 posted 08-05-2015 04:30 PM

nice job Moss
wish i have skills like you men nice job


View Mosquito's profile


11106 posts in 3374 days

#2 posted 08-05-2015 04:34 PM

August! Glad to still see you kickin’ around these parts :-)

Thanks, next I’d like to be able to make my own irons, those Lie-Nielsen iron’s aren’t cheap… wouldn’t have used it if I didn’t already have it laying around the shop for the past 2 years…

-- Mos - Twin Cities, MN - -

View AnthonyReed's profile


10171 posts in 3522 days

#3 posted 08-05-2015 04:36 PM

They came out great Mos. Your woodworking skills are formidable.

Getting pretty fancy with that camera work too.

-- ~Tony

View JayT's profile


6424 posts in 3292 days

#4 posted 08-05-2015 04:37 PM

Those are great, Mos. I’ll be cutting M&T joints this weekend and will be using them then. Thanks again for sharing your time and talent.

Hey, August. A +1 on being glad to see you still around. Hope things have slowed enough for you to pop in more frequently.

-- - In theory, there is no difference between theory and practice. In practice, there is.

View waho6o9's profile


9019 posts in 3658 days

#5 posted 08-05-2015 04:42 PM

Nice clean work Mos and we know JayT will put them to good use

and will take good care of them.

View terryR's profile


7646 posts in 3390 days

#6 posted 08-05-2015 04:52 PM

Great job, Mos!
Classy looks and I bet they are sweet users.

-- tr ...see one, do one, teach one...

View Don W's profile

Don W

20050 posts in 3649 days

#7 posted 08-05-2015 05:20 PM

Nice job Mos. And I like the professional pictures. Much better than my cell phone shots!

-- - Collecting is an investment in the past, and the future.

View 489tad's profile


4000 posts in 4093 days

#8 posted 08-05-2015 05:36 PM

Mos, I like them. Nice wood combinations. The grain on the walnut is beautiful. I think I have a couple of irons from my friend. Might have to make one for myself.

-- Dan, Naperville IL, I.G.N.

View Mosquito's profile


11106 posts in 3374 days

#9 posted 08-05-2015 06:47 PM

Thanks guys!

I’ve been trying a little harder at the pictures thing lately. Mostly on my computer case review side of things, but thought I’d use the same set up for these too :-)

-- Mos - Twin Cities, MN - -

View john2005's profile


1768 posts in 3259 days

#10 posted 08-05-2015 07:30 PM

Those look pretty nice Mos. I like the “Clifton-esq” form they have. They look very handy and well made

-- In theory there is no difference between theory and practice. In practice there is.

View byerbyer's profile


241 posts in 3054 days

#11 posted 08-05-2015 07:38 PM

Nice job Mos. I love the look.

-- Byer-- "Comparison is the thief of joy" -- T.R. Roosevelt

View bobasaurus's profile


3713 posts in 4265 days

#12 posted 08-05-2015 09:05 PM

These turned out great. They look comfortable to use and functional.

Didn’t know you reviewed computer cases, that’s a neat side project. I just built one in a fractal define r5 and am quite happy. Cable management sure is nice these days.

-- Allen, Colorado (Instagram @bobasaurus_woodworking)

View Mosquito's profile


11106 posts in 3374 days

#13 posted 08-05-2015 09:11 PM

Thanks Allen, I thought they were comfortable, but who knows how well that translates to someone else lol

I actually got an early shipment of the Define R5 (before it was announced/released) for doing a review of it. Great case.

I also quite liked the Define S (though I may be slightly biased, seeing as we got an engineering sample, and helped with feedback (reservoir/pump mounting bracket that they include with it was my idea and design…)

-- Mos - Twin Cities, MN - -

View ToddJB's profile


8736 posts in 3212 days

#14 posted 08-05-2015 10:46 PM

They look great, Mos. Super clean work.

How do you computer case reviews go, “I mean, it’s okay, it would be nicer if it was handcrafted out of rich mahogany and a 100 year old cast iron heat return grate”.

-- I came - I sawed - I over-built

View Tim's profile


3859 posts in 3043 days

#15 posted 08-05-2015 11:12 PM

Man those are nice.

showing 1 through 15 of 24 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics