Packing Crate

  • Advertise with us
Project by WirelessWoodworker posted 06-04-2015 05:23 PM 1768 views 0 times favorited 4 comments Add to Favorites Watch

The packing box is complete! I’m really happy with the way it came out. It’s going to be used as a toy chest for my daughter, so figured I’d throw some pictures of it in use too!

As I mentioned in my introduction/design post, this project was following Thomas, from Lost Art Press’ “The Joiner and Cabinet Maker,” as he makes his first project. I went through pretty much the exact steps that he does during the construction (I don’t have a birdcage awl and I glued my panel, but other than that it was identical) process, using only a handful of basic hand tools.

The wood is common pine, “deal” as Thomas would call it, the nails are 4d fine finish standard cut nails from Tremont, and the finish is just a few coats of shellac.

This was an interesting project for a couple of reasons. Firstly, it’s obviously a simple project, so it was actually a challenge to slow down and focus. Once I realized that I wasn’t in a hurry to have a completed project, I was able to focus on the construction and all the little details that I would have missed or glossed over otherwise. I’ve never taken the time to use a marking gauge to lay out my nails or screws before, but I did on this box, and the result is great.

Secondly, I don’t think that I’ve ever followed someones construction directions quite so closely before. If I was just given the plan for this box I probably would have constructed it differently and would have been happy about trying to figure out how to do something for myself. However, following Thomas’ directions forced me to do things a little differently, so as much as these are basic things, it just pushed me out of my comfort level just a little bit.

I love the old school look of this box. It looks like it should be used for TNT, or something from ACME (maybe not appropriate to use it as a toy box!). I really want to make a couple more of these to use them as storage in the shop. Maybe with a few Dharma Initiative logos on the side!

Fairly boring and basic, but feel free to take a look at the construction process on my blog:

Part 1

Part 2

Part 3

Part 4

Part 5

-- Tim, Delaware, and YouTube:

4 comments so far

View drnic's profile


59 posts in 2351 days

#1 posted 06-04-2015 05:58 PM

Sweet! Precious little girl! You are blessed.

View WirelessWoodworker's profile


88 posts in 2227 days

#2 posted 06-04-2015 06:09 PM

Sweet! Precious little girl! You are blessed.

- drnic

Thanks drnic! I remind myself everyday how much of a gift she is :-)

-- Tim, Delaware, and YouTube:

View robscastle's profile


7659 posts in 3175 days

#3 posted 06-04-2015 09:42 PM

Looks like you are going to need a bigger crate!

-- Regards Rob

View WirelessWoodworker's profile


88 posts in 2227 days

#4 posted 06-05-2015 05:59 PM

Looks like you are going to need a bigger crate!

- robscastle

Indeed, can’t believe how much she’s grown already!

-- Tim, Delaware, and YouTube:

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics