Project by Jeepin85CJ7 | posted 05-22-2015 01:04 AM | 1103 views | 1 time favorited | 3 comments | ![]() |
![]() |
Here is my latest project, a Cherry Slab Bar table. The legs and feet assembly are all of Cherry and all held together with Mortise and Tenon joints. I built this for my Sister who will be using it for a kitchen table.
Sorry for the middle picture, I tried to upload it 3 times and still it would not work properly.
I hope you enjoy the pictures and any comments are welcome.
3 comments so far
isotope
home | projects | blog
177 posts in 2634 days
#1 posted 05-23-2015 02:14 AM
I think the table is beautiful! You’re a very good brother, your sister will be thrilled.
TheWeiss
home | projects | blog
53 posts in 2246 days
#2 posted 06-08-2015 08:35 PM
It’s awesome. How did you attach the legs?
Jeepin85CJ7
home | projects | blog
83 posts in 2446 days
#3 posted 06-09-2015 08:27 PM
Thank you. The Legs are attached to the top brace with mortise and tenon joints on each leg. Then I attached the brace with elongated holes (for expansion – hoping they work out), all total 5 3 1/2 inch screws on each side. I took my time and shopped around Home Depot and Lowe’s for the right screws and finally came across them. It worked out better than I thought.
Have your say...