Another simple clock

  • Advertise with us
Project by DKV posted 05-17-2015 09:59 PM 1752 views 2 times favorited 11 comments Add to Favorites Watch

Ash and walnut. I like simple…

-- This is a Troll Free zone.

11 comments so far

View sras's profile


5594 posts in 4013 days

#1 posted 05-18-2015 12:13 AM

I like it!

-- Steve - Impatience is Expensive

View redryder's profile


2393 posts in 3986 days

#2 posted 05-18-2015 04:55 AM

Very modern. I like the touch at the corners….......................

-- mike...............

View LoganN's profile


485 posts in 2784 days

#3 posted 05-18-2015 11:51 AM

I love it! You have inspired me to try my hand at some cool clocks!

View Ivan's profile


16323 posts in 3751 days

#4 posted 05-18-2015 12:16 PM

It’s everything but simple. Totaly out of the box! Incredible design.

-- Ivan, Croatia, Wooddicted

View JoeinGa's profile


7741 posts in 2891 days

#5 posted 05-18-2015 03:17 PM

Does it weigh a ton? Good, then it fits you fine :-)

-- Perform A Random Act Of Kindness Today ... Pay It Forward

View robscastle's profile


7436 posts in 3088 days

#6 posted 05-18-2015 09:43 PM

Next one no doubt will be dribbling over the edge of the table!

-- Regards Rob

View Ken90712's profile


17909 posts in 4073 days

#7 posted 05-18-2015 11:21 PM

I like it so different… great job

-- Ken, "Everyday above ground is a good day!"

View Moron's profile


5048 posts in 4777 days

#8 posted 05-20-2015 12:40 PM

Nice, simple, I like it

not sure about that red second hand ?

-- "Good artists borrow, great artists steal”…..Picasso

View Daruc's profile


460 posts in 2016 days

#9 posted 05-20-2015 02:44 PM

Good idea to use the small pc at the bottom (inside the box)
to cover up the blowout or over cut from the through leg. It adds to the design.

-- -

View robscastle's profile


7436 posts in 3088 days

#10 posted 05-23-2015 05:45 AM

After looking deeper for the blow out in the corner I noticed that the wood working skills that were used in the construction are quite impressive.

Which lead me to wonder what the material is, where you bought it from, and how you went about the construction and the cost?

All the “stuff” you usually read about in the “story”

-- Regards Rob

View robscastle's profile


7436 posts in 3088 days

#11 posted 05-31-2015 11:13 PM

Yo Don are you still kickin?

-- Regards Rob

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics