twisted corner shelf

  • Advertise with us
Project by Blake Haskins posted 04-06-2015 03:36 AM 3043 views 9 times favorited 10 comments Add to Favorites Watch

twisted corner shelf made from 3/4 inch plywood. Enamel paint with wood epoxy used to fill gaps and seams. Made our first angle jig for the tablesaw. Easy two day project.

-- make sure you subscribe to my channel-

10 comments so far

View TDSpade's profile


121 posts in 3192 days

#1 posted 04-06-2015 06:06 AM

Well Done! I like it!

-- For every expert, there is an equal and opposite expert.

View robscastle's profile


7199 posts in 2980 days

#2 posted 04-06-2015 07:16 AM

The shelf looks great but I must ask why?

-- Regards Rob

View recycle1943's profile


4498 posts in 2398 days

#3 posted 04-06-2015 10:12 AM

The art of illusion – great job, that will surely be an item of interest for inquireing minds.

-- Dick, Malvern Ohio - my biggest fear is that when I die, my wife sells my toys for what I told her I paid for them

View dustyal's profile


1319 posts in 4251 days

#4 posted 04-06-2015 12:55 PM

Great design.

-- Al H. - small shop, small projects...

View Oldtool's profile


2958 posts in 2967 days

#5 posted 04-06-2015 02:26 PM

Very original and interesting, great thinking out of the box on your part.

-- "I am a firm believer in the people. If given the truth, they can be depended upon to meet any national crisis. The point is to bring them the real facts." - Abraham Lincoln

View greg48's profile


627 posts in 3533 days

#6 posted 04-06-2015 04:52 PM

Makes me wonder what it would look like with floating shelves? But well done none the less.

-- Greg, No. Cal. - "Gaudete in Domino Semper"

View ohwoodeye's profile


2432 posts in 3929 days

#7 posted 04-06-2015 07:22 PM

Very cool. I like it a lot. Thinking there should be one more shelf…......bottom left.
Still a big thumbs up.
Well done.

-- "Fine Woodworking" is the name given to a project that takes 3 times longer than normal to finish because you used hand tools instead of power tools. ----Mike, Waukesha, WI

View Grumpymike's profile


2439 posts in 3091 days

#8 posted 04-06-2015 09:17 PM

Great way to use up all those miss cut angles … Oh, you did this on purpose??
Unique shelf and a great job on it …

-- Grumpy old guy, and lookin' good Doin' it. ... Surprise Az.

View Blake Haskins 's profile

Blake Haskins

229 posts in 2014 days

#9 posted 04-07-2015 01:48 AM

thanks for all the nice comments. If we had to do it over we would probably make it a little bigger to increase the shelf sizes.

-- make sure you subscribe to my channel-

View Mike Gager's profile

Mike Gager

665 posts in 4043 days

#10 posted 04-07-2015 12:42 PM

is that an airsoft pistol?

at first i was wondering why the shelf spacing was off but then realized it was probably done like that intentionally to have space for the gun

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics