Fancy Table For A Big Green Egg

  • Advertise with us
Project by CarterR posted 03-16-2015 07:30 PM 2891 views 2 times favorited 3 comments Add to Favorites Watch

Click here for a video of the project

My father in law needed a new table for his Big Green Egg. I decided to make on without visible screws. The legs and stretchers are joined with mortise and tenon joints. The bottom slats are screwed on via pocket hole screws, and since the top is a solid panel I used spax lag bolts in elongated holes. The wood is sapele and the finish is General Finish Outdoor Oil.

The table is made to fit a small Big Green Egg table cover so the top dimensions are 25” Wide X 41” Long.

Here is a nice pile of Sapele. I used maybe 1/4” of this for the project. I got a good deal on the wood because it was the bottom of stack that had been picked through and they wanted to get rid of it since it was badly twisted and bowed.

Some glue ups

Before the finish


3 comments so far

View PaulHWood's profile


480 posts in 3591 days

#1 posted 03-17-2015 12:00 AM

Very nice job.

Your shop is immaculately clean

-- -Paul, South Carolina Structural Engineer by trade, Crappy Woodworker by choice

View Ken90712's profile


18100 posts in 4527 days

#2 posted 03-17-2015 08:09 AM

Very nice, Really like seaple, made a Bridal chest for blondie out of this.

-- Ken, "Everyday above ground is a good day!"

View BillinGa's profile


23 posts in 3288 days

#3 posted 03-18-2015 01:04 AM

Very nice! I helped a friend with a similar project recently, but this is a showpiece…

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics