| Project by GlassImpressions | posted 03-13-2015 01:16 PM | 70767 views | 30 times favorited | 14 comments |  |
 |
Drill/Driver Hanging Station
I filmed the build on my YouTube Channel. Please check it out! http://youtu.be/ALn9zyUp3_o
My old unit served me well, but I could incorporate some storage and increase the quality a little bit.
The build consists of MDF, 3” PVC Pipe, Glue, Pocket screws, paint.
Primary construction method was butt joints with glue, and pocket screws to hold the cabinet in place. You could easily incorporate a battery charger and make it an all in one storage/charging station.
If you have any more comments, questions or suggestions please leave them here or on YouTube.
-- Glass Impressions. Please check out my YouTube Channel! https://www.youtube.com/channel/UCSltwX_J9s-YH9tK3Qc4QUw
14 comments so far
RogerM
home | projects | blog
807 posts in 3365 days
#1 posted 03-13-2015 01:29 PM
Say maybe something like mine that appeared in WOOD Magazine:
-- Roger M, Aiken, SC
mtalley
home | projects | blog
112 posts in 2442 days
#2 posted 03-13-2015 01:41 PM
Very nice. I like the yellow color as well
GlassImpressions
home | projects | blog
112 posts in 3580 days
#3 posted 03-13-2015 01:46 PM
Looks pretty similar! What issue of WOOD? I didn’t see the article.. maybe I have the issue.
Here is my first drill station http://lumberjocks.com/projects/77553
Thanks!
-- Glass Impressions. Please check out my YouTube Channel! https://www.youtube.com/channel/UCSltwX_J9s-YH9tK3Qc4QUw
Dutchy
home | projects | blog
3938 posts in 3135 days
#4 posted 03-13-2015 03:57 PM
This looks great. Nice solution.
-- https://dutchypatterns.com/
playingwithmywood
home | projects | blog
444 posts in 2563 days
#5 posted 03-13-2015 06:04 PM
its hard to watch the video cause the processes you use really seems unsafe…. glad you did not get hurt
GlassImpressions
home | projects | blog
112 posts in 3580 days
#6 posted 03-13-2015 06:07 PM
Thanks Dutchy!
-- Glass Impressions. Please check out my YouTube Channel! https://www.youtube.com/channel/UCSltwX_J9s-YH9tK3Qc4QUw
Richard
home | projects | blog
1944 posts in 3657 days
#7 posted 03-13-2015 06:15 PM
Neat idea , now you need to buy New Drills to match the color of the station. My drills would be right at home it that unit.
GlassImpressions
home | projects | blog
112 posts in 3580 days
#8 posted 03-13-2015 06:33 PM
haha well I am a big fan of Makita! :)
-- Glass Impressions. Please check out my YouTube Channel! https://www.youtube.com/channel/UCSltwX_J9s-YH9tK3Qc4QUw
swirt
home | projects | blog
5845 posts in 3938 days
#9 posted 03-13-2015 06:47 PM
Nice use of the PVC. I did something similar to hang hammers.
-- Galootish log blog, http://www.timberframe-tools.com
GlassImpressions
home | projects | blog
112 posts in 3580 days
#10 posted 03-13-2015 08:24 PM
Thanks SWIRT!
-- Glass Impressions. Please check out my YouTube Channel! https://www.youtube.com/channel/UCSltwX_J9s-YH9tK3Qc4QUw
BCDesign
home | projects | blog
541 posts in 2389 days
#11 posted 03-13-2015 10:53 PM
Great work!love the idea!Now i just need to buy enough drills to fill one!
-- "The secret of getting ahead is getting started" Mark Twain https://www.youtube.com/user/bazza866/videos
Dustin
home | projects | blog
393 posts in 4416 days
#12 posted 03-13-2015 11:13 PM
Great idea!
Northwest29
home | projects | blog
1706 posts in 3456 days
#13 posted 03-14-2015 12:31 AM
Great shop addition. The storage above for drivers and bits is great. I always have trouble location my drivers and this would certainly eliminate that problem. Of I would have to remember to put them back after I use them. (-:
-- Ron, "Curiosity is a terrible thing to waste."
dcountry
home | projects | blog
27 posts in 2994 days
#14 posted 03-14-2015 11:48 AM
Great idea but watching the video I thought I was going to see justification to buy a saw stop table saw.
Have your say...