Hall tree for the wifey

  • Advertise with us
Project by TheFridge posted 03-08-2015 06:21 AM 1990 views 0 times favorited 3 comments Add to Favorites Watch
Hall tree for the wifey
Hall tree for the wifey No picture No picture No picture No picture No picture
Zoom Pictures

I had a bunch of scrap ply from some other projects that I used for this. I used plans from Ana white that the old lady sent me a link to.

I doubted the

ength of ply glued edge to edge so I had to supplement it with pocket screws. I learned a couple things about tearout when working with ply and edge banding in this project.

I bought a harbor freight lvlp gun to spray it with latex and it worked out pretty well once I got it dialed in. It would’ve came out a hair better if I didn’t brush a coat of primer on before I broke down and bought the gun.

Not too much to this one. More for her than me but shop time is shop time. Thanks for lookin.


-- Shooting down the walls of heartache. Bang bang. I am. The warrior.

3 comments so far

View Richard's profile


11310 posts in 4047 days

#1 posted 03-08-2015 07:33 AM

Good looking Hall Tree! Nice design and very practical. Well executed also.


-- Richard (Ontario, CANADA)

View helluvawreck's profile


32122 posts in 3881 days

#2 posted 03-08-2015 12:21 PM

That’s very nice. Congratulations.

helluvawreck aka Charles

-- helluvawreck aka Charles,

View TheFridge's profile


10863 posts in 2500 days

#3 posted 03-08-2015 02:13 PM

Thanks you sirs.

-- Shooting down the walls of heartache. Bang bang. I am. The warrior.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics