Cooler from Pallet Wood

  • Advertise with us
Project by chascoop posted 03-02-2015 12:00 AM 3265 views 9 times favorited 3 comments Add to Favorites Watch

This is the latest version of my pallet wood cooler. I tried to keep enough of the contours of the original pallet components so that there would be no mistake… it’s made from recycled pallets. Trying to get the joints snug is a challenge when each piece of pallet wood seems to have a mind of it’s own. I started wood working about two years ago after I retired so I’m obtaining equipment as I go. I now have a thickness planer so at least I can flatten out one side of the wood. That helped considerably.

-- chascoop, GA

3 comments so far

View robscastle's profile (online now)


7741 posts in 3213 days

#1 posted 03-02-2015 08:02 AM

Looks good! looks very good!.... in fact I was going to drop by then I saw one vital aspect missing!!

Nice work Chas !

-- Regards Rob

View canadianchips's profile


2632 posts in 4006 days

#2 posted 03-02-2015 01:26 PM

I have been re-cyling lumber for few years and building things… I am excited when I see someone else using re-purposed materials. I really like the job you did with this “kooler” !
Did you buy the cooler for the inside or re-purpose one you found ?

-- "My mission in life - make everyone smile !"

View chascoop's profile


4 posts in 2192 days

#3 posted 03-03-2015 05:14 AM

Thanks for the comments guys. The coolers are new, but I do try and use recycled hardware. I have been going to estate sales and find hardware and most of my woodworking equipment but at least in GA it looks as if we use coolers until all the goodies used up.

-- chascoop, GA

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics