LumberJocks

circle cutter

  • Advertise with us
Project by Rogue posted 01-10-2009 07:54 PM 3708 views 23 times favorited 12 comments Add to Favorites Watch

I’ve never been satisfied with the circle cutter jigs that I’ve seen. I don’t know if this is just new to me but it worked so I thought I’d share. What I liked about this is the arm is free giving you the chance to mark the circle diameter on the work piece cut the router bit to it, then just stop the router and set the stop. You can then move the piece back and forth in and out as you need. The circle is for an old fassion card table style piece that should be done and up on the project page soon.

-- Rogue





12 comments so far

View Miket's profile

Miket

308 posts in 4896 days


#1 posted 01-10-2009 08:03 PM

Pretty cool! I may have to try that.

-- It's better to have people think you're stupid rather than open your mouth and remove all doubt.

View CharlieM1958's profile

CharlieM1958

16292 posts in 5342 days


#2 posted 01-10-2009 08:04 PM

That’s a really neat jig!

-- Charlie M. "Woodworking - patience = firewood"

View Ampeater's profile

Ampeater

442 posts in 4871 days


#3 posted 01-10-2009 08:16 PM

I did something similar with my bandsaw for cutting circles. Yours looks better.

-- "A goal without a plan is a wish."

View mtnwild's profile

mtnwild

4159 posts in 4651 days


#4 posted 01-10-2009 10:20 PM

Looks handy, will keep it on file, thanks.

-- mtnwild (Jack), It's not what you see, it's how you see it.

View BarryW's profile

BarryW

1016 posts in 5030 days


#5 posted 01-10-2009 10:32 PM

Whatever the project is…sure looks remarkable…

-- /\/\/\ BarryW /\/\/\ Stay so busy you don't have time to die.

View Rj's profile

Rj

1047 posts in 4755 days


#6 posted 01-11-2009 12:35 AM

Looks real handy -Great Idea= now I’ll have to make one .
Thanks for posting it will come in handy.

-- Rj's Woodworks,San Jose & Weed Ca,

View Joe Weaver's profile

Joe Weaver

547 posts in 4810 days


#7 posted 01-11-2009 01:10 AM

great idea

-- Joe, Ga

View SPHinTampa's profile

SPHinTampa

567 posts in 4809 days


#8 posted 01-12-2009 05:51 AM

neat jig

-- Shawn, I ask in order to learn

View woodworm's profile

woodworm

14477 posts in 4714 days


#9 posted 01-25-2009 11:29 PM

Looks great and practical.

-- masrol, kuala lumpur, MY.

View Dusty56's profile

Dusty56

11863 posts in 4812 days


#10 posted 03-07-2009 09:19 PM

It looks like a great idea. Do you rough cut with your bandsaw first and then use this to clean it up , or just make one plunge cut and cut your circle all at once.

-- I'm absolutely positive that I couldn't be more uncertain!

View WistysWoodWorkingWonders's profile

WistysWoodWorkingWonders

12837 posts in 4281 days


#11 posted 02-07-2010 09:03 AM

great idea, I have been trying to design something similar for the bandsaw table that allows me to cut circles without any drilled holes in the center…

-- New Project = New Tool... it's just the way it is, don't fight it... :)

View a1Jim's profile

a1Jim

118162 posts in 4701 days


#12 posted 02-07-2010 06:15 PM

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com