LumberJocks

Can Organiser Unit

  • Advertise with us
Project by EdsCustomWoodCrafts posted 02-13-2015 01:53 AM 1838 views 0 times favorited 8 comments Add to Favorites Watch

I have been collecting a lot of small cans of finish weather it being a quart size or smaller so I decided to design and build this and in so I used a Kreg Pin hole jig for the first and I have to say it performed admirably.

It does the job .

-- Thanks Ed “A bad day woodworking is better than a good day working. ~Author unknown” . Come check out my website for more about what I make and how at www.edscustomwoodcrafts.com





8 comments so far

View ohwoodeye's profile

ohwoodeye

2773 posts in 4603 days


#1 posted 02-13-2015 03:50 PM

Curious to know…....if you put some of the “slim fast” on a board that is cut too wide, if it will shrink it to fit?

-- "Fine Woodworking" is the name given to a project that takes 3 times longer than normal to finish because you used hand tools instead of power tools. ----Mike, Waukesha, WI

View EdsCustomWoodCrafts's profile

EdsCustomWoodCrafts

932 posts in 2793 days


#2 posted 02-13-2015 04:13 PM



Curious to know…....if you put some of the “slim fast” on a board that is cut too wide, if it will shrink it to fit?

- ohwoodeye

What??

-- Thanks Ed “A bad day woodworking is better than a good day working. ~Author unknown” . Come check out my website for more about what I make and how at www.edscustomwoodcrafts.com

View MT_Stringer's profile

MT_Stringer

3183 posts in 4681 days


#3 posted 02-13-2015 04:18 PM

That is a nice looking organizer, but I gotta tell ya, it’s too small.
Where are you going to put the Spam, pork-n-beans and tuna fish? :-)

@Ohwoodeye – he’s too young to know what Slimfast is. LOL

-- Handcrafted by Mike Henderson - Channelview, Texas

View EdsCustomWoodCrafts's profile

EdsCustomWoodCrafts

932 posts in 2793 days


#4 posted 02-13-2015 04:23 PM



That is a nice looking organizer, but I gotta tell ya, it s too small.
Where are you going to put the Spam, pork-n-beans and tuna fish? :-)

@Ohwoodeye – he s too young to know what Slimfast is. LOL

- MT_Stringer

I made it for little cans of stain I can fit a lot of quart size which is what I have..and you probably can’t see but it’s sitting on the top shelf of a wide shelving unit I have paint on …
So what’s Slimfast??

-- Thanks Ed “A bad day woodworking is better than a good day working. ~Author unknown” . Come check out my website for more about what I make and how at www.edscustomwoodcrafts.com

View Richard's profile

Richard

1959 posts in 4140 days


#5 posted 02-13-2015 09:04 PM

Slimfas t is a Diet Aid . You have a can from it on the top of your unit with Brushes in it. They must be Skinny brushes. :)

View EdsCustomWoodCrafts's profile

EdsCustomWoodCrafts

932 posts in 2793 days


#6 posted 02-13-2015 09:13 PM



Slimfas t is a Diet Aid . You have a can from it on the top of your unit with Brushes in it. They must be Skinny brushes. :)

- Richard


Ohhhh I know Slimfast … Never needed it that can is probable 10 years old ….lol

-- Thanks Ed “A bad day woodworking is better than a good day working. ~Author unknown” . Come check out my website for more about what I make and how at www.edscustomwoodcrafts.com

View MT_Stringer's profile

MT_Stringer

3183 posts in 4681 days


#7 posted 02-13-2015 09:45 PM


Slimfas t is a Diet Aid . You have a can from it on the top of your unit with Brushes in it. They must be Skinny brushes. :)

- Richard

Ohhhh I know Slimfast … Never needed it that can is probable 10 years old ….lol

- edwood1975

Just weight until you turn 40! :-)

-- Handcrafted by Mike Henderson - Channelview, Texas

View Richard's profile

Richard

1959 posts in 4140 days


#8 posted 02-18-2015 08:04 PM


Slimfas t is a Diet Aid . You have a can from it on the top of your unit with Brushes in it. They must be Skinny brushes. :)

- Richard

Ohhhh I know Slimfast … Never needed it that can is probable 10 years old ….lol

- edwood1975

Just weight until you turn 40! :-)
- MT_Stringer


Yep thats when the Weight starts comming on.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com