Book matched entry way table

  • Advertise with us
Project by Zaphod07 posted 02-08-2015 12:22 AM 1783 views 1 time favorited 4 comments Add to Favorites Watch

This is a table that I just finished up. It was from one single 9” thick piece of wood that was pulled out of a fire pile at a slab mill in NC that I picked some maple at. I set up a router sled to flatten the two side of the log. Then I cut the piece down the center with my chainsaw and hit both new pieces with the router sled again. I cut the small slabs so they matched up, joined them together sanded the crap out of them applied finishing paste and buffed. Then I welded the table base with some 1” square tube and the circles were freebies from a scrap bin at a local machine shop.

4 comments so far

View Zaphod07's profile


82 posts in 2686 days

#1 posted 02-08-2015 12:23 AM

ha I can’t seem to get the pictures to go the right way

View robscastle's profile


8555 posts in 3664 days

#2 posted 02-08-2015 04:02 AM

Well you could just,


Look to be a very nice project befiting of displaying the correctway up!!

-- Regards Rob

View a1Jim's profile


118322 posts in 5037 days

#3 posted 02-08-2015 04:07 PM

View cdaulton's profile


25 posts in 3928 days

#4 posted 02-08-2015 09:54 PM

That’s a pretty hoopy frood table.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics