Cutting Boards

  • Advertise with us
Project by kenn posted 02-01-2015 01:31 AM 1470 views 1 time favorited 4 comments Add to Favorites Watch

I’m joining the End Grain Cutting Board club. It was time for new cutting boards at our house and I decide to make some EGCBs. I ended up with 13 of them. Turns out the wife and kids loved them and want me to make more, but they will have to wait while I work on some other projects first. My primary design goal was the standard Wood Whisperer style made in cherry/maple and purple heart/maple. I made a cherry pair to ensure my technique was sound. The rest were made from the left overs. I used a local cabinet shop’s wide belt sander to sand them through 120 grit and save me lots of time. The finish is mineral oil. All in all, a nice proect.

-- Every cloud has a silver lining

4 comments so far

View WhattheChuck's profile


464 posts in 4727 days

#1 posted 02-01-2015 01:33 AM

I wanted to join that club this Christmas break, but life interfered… I’m on your heels, though!

-- Chuck, Pullman, WA

View bondogaposis's profile


6000 posts in 3518 days

#2 posted 02-01-2015 02:50 AM

Nice boards, nice you could get them sanded.

-- Bondo Gaposis

View lew's profile


13390 posts in 4922 days

#3 posted 02-01-2015 03:42 PM

You have been busy!

Those are really nice!

-- Lew- Time traveler. Purveyor of the Universe's finest custom rolling pins.

View ohwoodeye's profile


2663 posts in 4320 days

#4 posted 02-02-2015 03:22 PM

They do look nice. Well done.

-- "Fine Woodworking" is the name given to a project that takes 3 times longer than normal to finish because you used hand tools instead of power tools. ----Mike, Waukesha, WI

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics