bottle opener

  • Advertise with us
Project by littleladywoodshop posted 01-21-2015 04:30 AM 1185 views 1 time favorited 2 comments Add to Favorites Watch
bottle opener
bottle opener No picture No picture No picture No picture No picture
Zoom Pictures

Made of Mahogany.

-- Fail to plan and you are planning to fail. Ben Franklin

2 comments so far

View Jeff Mazur's profile

Jeff Mazur

119 posts in 2272 days

#1 posted 01-21-2015 05:08 AM

Beautiful joinery, man. Can you post plans and a cut list?


-- Woodworking is a beautiful, physical, cerebral, and noble art.

View littleladywoodshop's profile


49 posts in 2280 days

#2 posted 01-21-2015 02:12 PM

This is just one piece of 3/4 Mahogany cut 12×5 1/2. I used a 5/8 fostner bit to drill the holes for rare earth magnets and used a 5/32 Roman Ogee router bit for the edges. I sanded it with 400 grit paper and used tung oil on it. I put a Keyhole hanger on the back and it secures to the wall quite well.

I made 3 of these, on one I put my son’s name and on one I put my son in law frat letters. The were 1/4 birch letters I ordered from CraftsCuts on the internet.

I ordered the opener on Ebay and the cost to make these was about 12 each.

Thanks for the comments.

-- Fail to plan and you are planning to fail. Ben Franklin

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics