Chest of drawers

  • Advertise with us
Project by Grampsrichard posted 01-17-2015 01:54 AM 1445 views 1 time favorited 3 comments Add to Favorites Watch

This chest of drawer was designed to match the bed I built (an earlier post) for my grandson. Its built from 3/4” plywood and pine. The drawers are 3/4” plywood joined with pocket screws and faced in pine. His love for Lego’s led to the handles on the drawers and the switch plate on the wall to the right. It was finished with the same blue as the bed. Also, on the top is a bank I made for him that he requested to look like a “Bank” and above is a Batman shelf for his trophy’s and awards.

-- Grampsrichard

3 comments so far

View gsimon's profile


1335 posts in 3456 days

#1 posted 01-17-2015 04:46 PM

nice job – the bead in the uprights and the lego handles really add a nice touch

-- Greg Simon

View PaulHWood's profile


482 posts in 3596 days

#2 posted 07-26-2018 05:27 PM

nice job, what is the finish?

-- -Paul, South Carolina Structural Engineer by trade, Crappy Woodworker by choice

View bugradx2's profile


398 posts in 1362 days

#3 posted 07-26-2018 05:55 PM

this is great! Did you come up with the design or base it from a set of plans?

-- The only thing not measured in my shop is time

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics