Ipod passive speaker

  • Advertise with us
Project by Riccardom posted 01-16-2015 09:03 AM 3484 views 5 times favorited 3 comments Add to Favorites Watch

This was just a try of a passive speaker for my daugther’s Ipod.
I visited many sites to find inspiration and eventually came out with this “horn loaded” configuration, that is easy to obtain on the bandsaw.
To verify the results I used a piece of soft wood. To maintain the grain I cut the sides as for bandsaw boxes but next time i’ll use three different timber to simplify the assembly.
It gain a lot of volume even tough the timbre is altered.
A good active speaker is not comparable but is better than its speaker alone.
Thanks for watching

-- Riccardo M., Italia

3 comments so far

View jaykaypur's profile


4017 posts in 3658 days

#1 posted 01-16-2015 10:37 AM

Nice design. Looks good and I bet it sounds good too.

-- Use it up, Wear it out --------------- Make it do, Or do without!

View SoonerFanJerry's profile


81 posts in 2777 days

#2 posted 01-17-2015 12:26 AM

Like it!!

View Joe O' Woodshop's profile

Joe O' Woodshop

76 posts in 4401 days

#3 posted 01-18-2015 12:32 AM

I may try this on some of the Smartphone Stands I’ve been making. A friend suggested I try doing something like what you are doing.

-- "Do what you like, Like what you do"

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics