LumberJocks

Shop Notes Drill Press Table

  • Advertise with us
Project by fivecodys posted 12-31-2014 11:29 PM 2089 views 7 times favorited 5 comments Add to Favorites Watch

A big Thank You to Steve Ramsey for inspiring me to build this project.
I used the plans from Shop Notes.
It was fun to build and is very useful.
I cut about 8 spare inserts for future use.
This was built during the Thanksgiving 4 day weekend.
I gotta find a better place to hang my bicycle! :)

Thanks for looking,

Chem

-- When you leave your shop for the night, make sure you can always count to 10.





5 comments so far

View Tim_CPWD 's profile

Tim_CPWD

382 posts in 1572 days


#1 posted 01-01-2015 03:12 AM

Nice job. Having a good work support table is essential for accuracy. Looks like a great design.

-- Tim Haenisch, San Diego Ca. http://www.facebook.com/commandperformancewooddesigns

View recycle1943's profile

recycle1943

2832 posts in 1949 days


#2 posted 01-01-2015 12:22 PM

Nice table, make projects lower than bike and it won’t be a problem ‹(•¿•)›

-- Dick, Malvern Ohio - my biggest fear is that when I die, my wife sells my toys for what I told her I paid for them

View Picklehead's profile

Picklehead

1053 posts in 2256 days


#3 posted 01-01-2015 05:23 PM



I gotta find a better place to hang my bicycle! :)

For a minute I thought your shop was on the ceiling of your garage!

-- Quote from ebay tool listing: " Has nicks and dings wear and tear dust and dirt rust and pitting but in good working condition"

View SuperCubber's profile

SuperCubber

1069 posts in 2611 days


#4 posted 01-07-2015 09:51 PM

Great job, Bill! I’ve been putting off that table (thought it was Steve’s design) for a while, but it’s always been my favorite one. However, I didn’t realize there was a ShopNotes plan for it. Do you recall which issue it was?

Thanks!

-- Joe | Spartanburg, SC | "To give anything less than your best is to sacrafice the gift." - Steve Prefontaine

View fivecodys's profile

fivecodys

1382 posts in 1963 days


#5 posted 01-08-2015 03:47 AM



Great job, Bill! I ve been putting off that table (thought it was Steve s design) for a while, but it s always been my favorite one. However, I didn t realize there was a ShopNotes plan for it. Do you recall which issue it was?

Thanks!

- SuperCubber

PM me your e-mail and I will sent you the PDF of the plans.

-- When you leave your shop for the night, make sure you can always count to 10.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com