Travel Case

  • Advertise with us
Project by KMP Wood Designs posted 12-31-2014 11:07 PM 1381 views 0 times favorited 3 comments Add to Favorites Watch

This is a travel case I made for our company’s General Manager. It will be used to carry the documents used in justifying each service organization that was started over the last 42+ years. We have 60+ sites in North America.

The entire case is made from solid cherry. The box joints were created using an interlocking 45 degree miter bit for the box sides and a .250” rabbiting bit to recess the bottom. The lid thickness started at 1.500” and was milled down with a CNC router which created the .500” raised graphics.

I purchased the 3/8” x 1” SOSS invisible hinges, chest handle and small brass box catches from Woodcraft. The brass chain was purchased from our local Lowe’s store.

I used an Apollo HVLP sprayer to apply four coats of Deft clear wood satin lacquer.

-- Jim, Virginia,

3 comments so far

View jaykaypur's profile


4017 posts in 2923 days

#1 posted 12-31-2014 11:20 PM

Very well done. The raised graphics look great and cherry is always a nice wood for projects like this. What are the dimensions of the case?

-- Use it up, Wear it out --------------- Make it do, Or do without!

View KMP Wood Designs's profile

KMP Wood Designs

52 posts in 3163 days

#2 posted 12-31-2014 11:26 PM

The case is 14” x 11” x 5”

-- Jim, Virginia,

View Roger's profile


21011 posts in 3319 days

#3 posted 01-01-2015 03:21 PM

Very nice. Those locking miters look gr8!

-- Roger from KY. Work/Play/Travel Safe. Keep your dust collector fed. [email protected]

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics