Craftsman Open Panel Display Shelf

  • Advertise with us
Project by depictureboy posted 11-19-2008 04:02 AM 3055 views 8 times favorited 10 comments Add to Favorites Watch

Well it was done earlier this month. finally got time to post the pictures.

Here is my blog about the creation…

-- If you can't build it, code it. If you can't code it, build it. But always ALWAYS take a picture.

10 comments so far

View lew's profile


13427 posts in 5000 days

#1 posted 11-19-2008 04:28 AM

Very Nice!!

I really like the open design and the geometry of the piece.

-- Lew- Time traveler. Purveyor of the Universe's finest custom rolling pins.

View woodworm's profile


14477 posts in 4835 days

#2 posted 11-19-2008 12:52 PM

Simple design yet very attractive!
Great !

-- masrol, kuala lumpur, MY.

View darryl's profile


1795 posts in 5571 days

#3 posted 11-19-2008 02:21 PM

that came out great. I remember you bringing this up a while back.
nice work.

View Jason's profile


660 posts in 4753 days

#4 posted 11-19-2008 04:28 PM

Nicely done. I was toying with the idea of a similar shelf, but with just two vertical elements as opposed to the frame. After seeing your success I should really get after it. Thanks for sharing.

-- Jason - Colorado Springs

View Icemizer's profile


88 posts in 4784 days

#5 posted 11-20-2008 03:08 PM

Simple and elegant I like it a lot.

-- Say what you mean and mean what you say.

View anforte's profile


157 posts in 4589 days

#6 posted 10-06-2009 04:54 PM

In the words of Thomas Aquinas,

Id Quid Placet Visum

That Which, When Seen, Gives Pleasure

-- Anforte NJ

View gazagirl's profile


7 posts in 4335 days

#7 posted 12-09-2009 08:02 PM

Wow!! Super kool!!

-- garzagirl

View jack's profile


45 posts in 4573 days

#8 posted 04-24-2011 03:52 PM

Very nice work, how about some stain glass in the frames ?

-- All about wood..

View ScottKaye's profile


802 posts in 3198 days

#9 posted 04-07-2013 08:55 PM

how are the shelves attached to the frames?

-- "Nothing happens until you build it"

View depictureboy's profile


420 posts in 4887 days

#10 posted 04-10-2013 02:15 AM

The frames have half-inch grooves that the shelves fit in. The section between the frames is flush to the wall

SkottKaye, I fixed the link above to the blog. I have some sketchup models showing the design concept.

-- If you can't build it, code it. If you can't code it, build it. But always ALWAYS take a picture.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics