Project by socrbent | posted 12-27-2014 03:52 AM | 2669 views | 14 times favorited | 7 comments | ![]() |
![]() |
Got this idea at the 2014 Artistry in Wood in Dayton Ohio. They are meant to hold closed a chip bag after opening. These were turned from Hickory, sanded through to 400 and applied BLO. Then drilled a hole to be end of slot and cut the slots on a bandsaw. Made the simple jig to hold strips of sand paper to smooth out the slot.
-- socrbent Ohio
7 comments so far
hoss12992
home | projects | blog
4181 posts in 3352 days
#1 posted 12-27-2014 08:45 PM
That is really cool. Great job
-- The Old Rednek Workshop https://www.facebook.com/theoldrednekworkshoptn
Rockbuster
home | projects | blog
499 posts in 4068 days
#2 posted 12-28-2014 04:18 PM
Neat idea here socrbent,I like nice crisp potato chips,, but the grandkids seem to have some sort of mental bloc when it comes to re-closing the bag, probably cause it is not programmed into their I-pads or phones. Maybe after I make a couple of these, I can again enjoy crisp chips. Thanks for the Idea.
“Rockbuster”
-- Rockbuster,Ft. Wayne,In It is far better to remain silent, and appear the fool, than it is to open ones mouth, and remove all doubt.
socrbent
home | projects | blog
1051 posts in 3729 days
#3 posted 12-28-2014 07:05 PM
Thanks Guys for the compliments. This is a quick and easy project.
-- socrbent Ohio
Vicki
home | projects | blog
1235 posts in 4804 days
#4 posted 12-29-2014 05:22 PM
They look great! And that is a wonderful idea!!! It’s going on my list. Thanks so much for posting it.
-- Vicki on the Eastern Shore of MD
soupyg
home | projects | blog
7 posts in 2696 days
#5 posted 01-08-2015 11:25 PM
Great idea, I will have to give it a try.
JoeinGa
home | projects | blog
7741 posts in 3466 days
#6 posted 01-08-2015 11:33 PM
I really like your sanding jig! I’ll hafta store that one in my memory bank for later use!
-- Perform A Random Act Of Kindness Today ... Pay It Forward
leafherder
home | projects | blog
2007 posts in 3412 days
#7 posted 01-08-2015 11:58 PM
I missed the show this time. Glad to see a new idea. Thanks for posting
-- Leafherder
Have your say...