Router Table

  • Advertise with us
Project by EdsCustomWoodCrafts posted 11-17-2014 04:06 AM 2329 views 0 times favorited 3 comments Add to Favorites Watch

I decided to attach these T-Nuts for those of you that aren’t familiar they are basically threaded inserts that you can can hammer into wood after you drill the wood out where the receiving bolt will be screwed in …

I decided at a later point that I will be putting in my own router fence with a few bells all whistles but before I build that I need to put in the track, I decided to use Kreg Mini track with jig pack that I bought its basically a couple of hex nuts with threaded knobs that I can use as to tighten the fence into place…..more about that later… but here is a picture

I had some leftover poplar so I decided to wrap the tables edges in it to protect the corners.

—Ed K.

-- Thanks Ed “A bad day woodworking is better than a good day working. ~Author unknown” . Come check out my website for more about what I make and how at

3 comments so far

View Vince's profile


1334 posts in 4890 days

#1 posted 11-17-2014 04:27 AM

Nice work…looks great.

-- Vince

View greg48's profile


635 posts in 4218 days

#2 posted 11-17-2014 05:12 AM

That’s a whole lot nicer than mine. Of course now you know that we are expecting some new projects coming off that nice router table.

-- Greg, No. Cal. - "Gaudete in Domino Semper"

View KDO's profile


154 posts in 4230 days

#3 posted 01-15-2015 06:58 PM

Nice table.
I love using T-nuts. They are great.
Keep up the good work.

-- Christian, Husband, Grandpa, Salesman, amateur Woodworker.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics