Project by EdsCustomWoodCrafts | posted 11-12-2014 03:43 AM | 2302 views | 6 times favorited | 4 comments | ![]() |
![]() |
Its time to post this as a project since its been a blog item for about a month.. I am still working on an actual router table top that I’m making out of 3/4’’ MDF.
Everything in this cabinet at home I made and it was a very educational journey . There are about 16 photos of various aspects of the cabinet but I added only 6 since that’s all I am allowed. If you want to see more pics look at my blog..
-- Thanks Ed “A bad day woodworking is better than a good day working. ~Author unknown” . Come check out my website for more about what I make and how at www.edscustomwoodcrafts.com
4 comments so far
EEngineer
home | projects | blog
1137 posts in 4581 days
#1 posted 11-12-2014 12:14 PM
Not a bad build but just a couple of comments…
Do you really need router bit storage that tall? I can’t really think of any bits that need that much clearance and you could fit (maybe) two bit storage drawers in the space you have taken for one on each side.
I think (I did) I would opted for a large drawer on the bottom instead of two doors. To me it is a lot easier to get/put things into a full-extension drawer than to fumble around in a cavity that close to the floor.
-- "Find out what you cannot do and then go do it!"
EdsCustomWoodCrafts
home | projects | blog
932 posts in 2311 days
#2 posted 11-12-2014 01:01 PM
-- Thanks Ed “A bad day woodworking is better than a good day working. ~Author unknown” . Come check out my website for more about what I make and how at www.edscustomwoodcrafts.com
EEngineer
home | projects | blog
1137 posts in 4581 days
#3 posted 11-13-2014 03:01 AM
I sure didn’t mean to be knocking your work. Just comments. It is a gorgeous build.
-- "Find out what you cannot do and then go do it!"
Joe
home | projects | blog
80 posts in 2910 days
#4 posted 11-13-2014 05:34 PM
Edwood I think the cabinet looks great. Any chance you could email me the overall dimensions? I’m trying to come up with a cabinet for the top I’ve put together and I like your design. Nice work.
J
-- It's better to have a tool and not need it than to need a tool and not have it.
Have your say...