LumberJocks

MITER SLOT CUTTING JIG

  • Advertise with us
Project by AKDave posted 11-09-2014 05:36 PM 1836 views 6 times favorited 4 comments Add to Favorites Watch

I needed to cut some slots in the miter joints of some already glued up frames, so I threw together this large jig to cut them. The bottom piece is 4×24x3/4 melanine.

-- AKDave Chugiak, Alaska, [email protected]





4 comments so far

View majuvla's profile

majuvla

14384 posts in 3231 days


#1 posted 11-09-2014 05:44 PM

As long as it serves it’s OK.

-- Ivan, Croatia, Wooddicted

View GCWC's profile

GCWC

130 posts in 1664 days


#2 posted 11-09-2014 10:32 PM

what do you have glued to the clamps?

View AKDave's profile

AKDave

57 posts in 2824 days


#3 posted 11-09-2014 11:03 PM

To gscz28:
Sorry, the photo is not clear enough. I assume you are referring the the two tan colored objects under the clamps. Those are just biscuits (which were handy) to protect the work piece from being dented by the clamp.

-- AKDave Chugiak, Alaska, [email protected]

View Dusty56's profile

Dusty56

11838 posts in 4052 days


#4 posted 11-10-2014 02:57 AM

Nice jig and good use of the biscuits : )

-- I'm absolutely positive that I couldn't be more uncertain!

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com