Cutting Boards

  • Advertise with us
Project by SCBryan posted 11-06-2014 01:18 PM 3633 views 56 times favorited 18 comments Add to Favorites Watch

I finished these 2 sets of cutting boards for both of my daughters. As luck would have it they are both fighting over the same set. To solve the fight I told them whoever moves out first gets the first choice.

One set was mostly Walnut with Oak strips, the other set was mostly Oak with Walnut strips.

The design of these cutting boards came from WoodSmith Magazine.

-- Bryan, South Carolina

18 comments so far

View Scott Oldre's profile

Scott Oldre

1126 posts in 3942 days

#1 posted 11-06-2014 01:34 PM

Love the sets. I think I’m leaning towards the lighter set. I’m usually drawn to the darker walnut, but in this case the dark accent sets it off much better than the darker heavy area. They’re going to be lucky whoever gets either one of them.

Thanks for sharing

-- Scott, Irmo SC

View SteveMI's profile


1141 posts in 3805 days

#2 posted 11-06-2014 02:27 PM

I think you helped with my Christmas Shopping for this year. Which issue was it in?


View SCBryan's profile


37 posts in 2839 days

#3 posted 11-06-2014 02:31 PM

The issue was over 5 years ago. However I think it can be found in their weekend woodworking project book on sales for $10. Any time I have struggled to find a project Woodsmith is very helpful, just call them they can point you right to the exact issue.

-- Bryan, South Carolina

View steve_in_ohio's profile


1195 posts in 2121 days

#4 posted 11-06-2014 02:49 PM

very cool cutting boards, great job

-- steve, simple and effective

View Gshepherd's profile


1727 posts in 2712 days

#5 posted 11-06-2014 03:44 PM

Very Nice. You should do a blog on a set.

-- What we do in life will Echo through Eternity........

View mike1950's profile


364 posts in 2309 days

#6 posted 11-06-2014 04:14 PM

NICE boards

-- "There are only two ways to live your life. One is as though nothing is a miracle. The other is as if everything is."– Albert Einstein

View kimosawboy's profile


173 posts in 3481 days

#7 posted 11-06-2014 04:23 PM

I see some of these in my future!
You did a great job on these ones.

G Vavra

View calisdad's profile


334 posts in 2020 days

#8 posted 11-06-2014 04:38 PM

Very Handsome !!

They remind me of my Flexi-Flyer sled I rebuilt 2 years ago.

-- Groveland, CA.

View hotncold's profile


787 posts in 2055 days

#9 posted 11-06-2014 05:24 PM

If your solution as to who gets what set actually works, I’m getting started immediately!!
Nice work!

-- Dennie - Tennessee

View ScottM's profile


742 posts in 2657 days

#10 posted 11-06-2014 05:53 PM

Nice job. I can see these as a Christmas present. For anyone interested, you find the plans for these at the address below.

View WoodGuyScott's profile


51 posts in 2174 days

#11 posted 11-06-2014 07:50 PM

Well, now I know what I’m doing with the cutoff bin this year for Christmas. Thank goodness I bought that drum sander…

-- --Shafe

View JL7's profile


8752 posts in 3475 days

#12 posted 11-07-2014 01:13 AM

Very nice! Did (1) set of these a few years ago for my folks, but they won’t use them…...well done!

-- Jeff .... Minnesota, USA

View Greg In Maryland's profile

Greg In Maryland

553 posts in 3508 days

#13 posted 11-07-2014 01:47 AM

I am not sure what issue of Woodsmith the plans are from, but there is a link to the PDF plans from Woodsmith’s website:


View Ivan's profile


15065 posts in 3378 days

#14 posted 11-07-2014 06:34 PM

All the best for design.

-- Ivan, Croatia, Wooddicted

View Gregg M.'s profile

Gregg M.

215 posts in 2192 days

#15 posted 11-07-2014 08:03 PM

I like these boards a lot. Walnut and oak look good together. Nice design and well executed. I would like to make some for gifts. Hope you don’t mind if I borrow from you…

-- Marvel Woodworking, West Chester, PA -

showing 1 through 15 of 18 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics