• Advertise with us
Project by ay1978pa posted 10-13-2014 07:01 PM 1425 views 0 times favorited 3 comments Add to Favorites Watch

A tall desk that I made for the living room/office. The wood is some cut-offs of 2×4’s from the dumpster next door (the house was gutted and flipped, and I found a lot of good lumber there), some pallet wood and a cherry (?) board that I found in the attic. (Not sure it’s cherry. Any ideas? It looked a hundred years old). I used that for the desk top and the drawer front. Another piece of seasoned 2×4 from the attic made the inserts for the legs. This is also my first attempt at inlay. The desk is 40’ tall, 52’ long and 20’ deep. Thanks for looking.

-- Alex

3 comments so far

View bruc101's profile


1411 posts in 4591 days

#1 posted 10-13-2014 11:27 PM

You did good. I would say your top and drawer front are SYP (southern yellow pine) one of my favorite woods.

-- Bruce Free Plans

View Bricofleur's profile


1480 posts in 4243 days

#2 posted 10-14-2014 02:21 PM

Nice and useful project, as well a great inspiration ! Thanks for posting.



-- Learn from yesterday, work today and enjoy success tomorrow. --

View helluvawreck's profile


32122 posts in 3916 days

#3 posted 08-27-2017 12:16 PM

This is a very nice table. Congratulations on a job well done.

helluvawreck aka Charles

-- helluvawreck aka Charles,

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics