Saw Swap 2014

  • Advertise with us
Project by waho6o9 posted 10-07-2014 05:05 PM 3403 views 1 time favorited 13 comments Add to Favorites Watch

Saw Swap 2014 was a lot of fun and a great learning experience to make
your own saw and or repurpose a saw.

If your thinking about a new saw, why not make your own. Go through
the above thread and have a look see.

Special thanks to Hammberthumb for a back up saw in case it was needed,

and to ErikF for providing members with saw kits at fair prices.

Make your own and support your fellow Lumber Jocks.

I used Zebrawood and a kit from ErikF to make my saw and it turned out
pretty good.

I soaked the handle in shellac and then used Antiquax Lavender Wax Polish
to finish the metal and Zebrawood.

Thank you for the great Saw Swap of 2014 :)

13 comments so far

View summerfi's profile


4380 posts in 2543 days

#1 posted 10-07-2014 05:21 PM

Thanks for hosting Saw Swap 2014, waho! It was a fun experience. Very nice job on your zebrawood saw too!

-- Bob, Missoula, MT -- Rocky Mountain Saw Works -- ~Non multa sed multum~

View Gshepherd's profile


1727 posts in 3058 days

#2 posted 10-07-2014 06:16 PM

Very nice lookin saw…..

-- What we do in life will Echo through Eternity........

View HillbillyShooter's profile


5811 posts in 3148 days

#3 posted 10-07-2014 06:16 PM

Very attractive and nicely crafted!

-- John C. -- "Firearms are second only to the Constitution in importance; they are the peoples' liberty's teeth." George Washington

View waho6o9's profile


8942 posts in 3433 days

#4 posted 10-07-2014 06:51 PM

Thank you Bob and your valuable input helping others made the
saw swap that more enjoyable. You have a great skill set in the
half back saw that Norm received and we know he’s still grinning.
Great job Bob and thanks again for helping out.

Thanks for the compliment Gshepherd, the mallets you turn are
awesome and inspirational.

I appreciate your kind words HillBillyShooter and congrats on your
Daily Top 3 award for your Auxiliary TS/Router Fence and FB Rail!
This is great:

View BTimmons's profile


2303 posts in 3341 days

#5 posted 10-07-2014 07:36 PM

Quite the looker.

-- Brian Timmons -

View lew's profile


13179 posts in 4611 days

#6 posted 10-07-2014 07:45 PM

That’s one sweet looking saw!!!

-- Lew- Time traveler. Purveyor of the Universe's finest custom rolling pins.

View Don W's profile

Don W

19702 posts in 3424 days

#7 posted 10-07-2014 10:56 PM

Very nice work. You should be proud of it.

-- - Collecting is an investment in the past, and the future.

View ErikF's profile


652 posts in 3100 days

#8 posted 10-08-2014 12:10 AM

I look forward to putting years of use on this saw, it is very comfortable and looks awesome! Thanks for hosting the swap and putting my name out there for kits. Much appreciated!

-- Power to the people.

View Ken90712's profile


17902 posts in 4045 days

#9 posted 10-08-2014 09:20 AM

Wow that is really nice, Thx for sharing.

-- Ken, "Everyday above ground is a good day!"

View waho6o9's profile


8942 posts in 3433 days

#10 posted 10-08-2014 01:27 PM

Thank you folks I appreciate your kind words.

View Hammerthumb's profile


3069 posts in 2831 days

#11 posted 10-08-2014 10:10 PM

Really nice work Waho. I really like the handle.

Wanted to say thanks for a well run swap.

Good luck with your new saw!

-- Paul, Duvall, WA

View ShaneA's profile


7085 posts in 3454 days

#12 posted 10-08-2014 11:06 PM

That really turned out great. Anyone would be proud to own that one.

View Brit's profile


8171 posts in 3699 days

#13 posted 10-10-2014 12:06 PM

Lovely saw Wahoo. You done good my friend.

-- Andy - Old Chinese proverb says: "If you think something can't be done, don't interrupt man who is doing it."

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics