macassar ebony starburst bed

Amazing work as always, your killing us only posting one picture :)

-- Paul--- Creativity is allowing yourself to make mistakes. Art is knowing which ones to keep. — Scott Adams

the beginning pics are on my home page, thanks

-- no matter what size job big or small do a job right or don't do it at all.

Seeing your cabinet saw being dwarfed there, really gives this a scope of scale! Impressive.

-- Peter Brown - Collector of WD-40 and wood splinters

Fit for a king! Or maybe some Hollywood star. Absolutely beautiful. Thanks for posting.

-- Leafherder

In Sapulpa still? The bed looks obscenely expensive.

-- " I'll try to be nicer, if you'll try to be smarter" gfadvm

no andy i am back in san diego working on another house.

-- no matter what size job big or small do a job right or don't do it at all.

Wow that’s impressive,great job.

An amazing and beautiful bed.

Just one thing though..

Polyester is a fabric often found in leisure suits from the ‘70’s Polyurethane is a finish popularly used in woodworking.

Not to detract from the amazing product you have made.

-- Eric - "I'm getting proficient with these hand jobbers. - BigRedKnothead"

polyester is the best and hardest finish and is banned in most states the parts were sent to new jersey for the full fill polyester finish, kitchen expo uses that finish on their million dollar kitchens. thanks airframer and jim

-- no matter what size job big or small do a job right or don't do it at all.

and andy when you look at the radius windows closest to the road thats the master bedroom with the bed.

-- no matter what size job big or small do a job right or don't do it at all.

http://www.woodweb.com/knowledge_base/Polyester_finishing_techniques.html

-- no matter what size job big or small do a job right or don't do it at all.

used several bundles of veneer and most of it was simple bender board formed in a vacuum bag the starburst was very hard to do, it took 48 pieces and i left the waterfall parts big because the radius grows on the waterfall, had to line up the grain then brush on tight bond and then with an iron and a water mister i sprayed water on the outside of the veneer then hit it with the iron, the steam goes right thru the veneer and bonds in about a minute.

-- no matter what size job big or small do a job right or don't do it at all.

all the flat parts were done in a hot press and then miter folded.

-- no matter what size job big or small do a job right or don't do it at all.

WOW amazing That is a piece of art not a bed, I love it and thanks for the info on polyester I’m going to go check it out right now.

-- Wood and Glass they kick (well you know) Have a great day - Dug

Magnificent, That is one beautiful piece of furniture.

-- Dennis Zongker