Table Saw Sled

  • Advertise with us
Project by AKSteve posted 09-27-2014 04:45 PM 2484 views 1 time favorited 4 comments Add to Favorites Watch

I got this plan off of the internet and I can’t remember where unfortunately, but if your interested I can email it to who ever. it’s pretty basic and has a feature for cutting 45’s I drill a hole on the corner to hang it when not in use. Some of the specs weren’t really thought out, it calls for a couple of T-nuts on the end which you have to hammer in, but those nuts don’t stick very well in MDF, so I epoxy’d over the top of them to get them from popping out so easily. and some of the dimensions were off, just need to look at the plan carefully. anyway it works great, I have been wanting to build one for a while. thanks for looking !

-- Steve - Wasilla, Alaska

4 comments so far

View Ken90712's profile


18067 posts in 4431 days

#1 posted 09-27-2014 06:23 PM

Great looking sled, well done.

-- Ken, "Everyday above ground is a good day!"

View Dave Peura's profile

Dave Peura

42 posts in 3925 days

#2 posted 09-28-2014 02:02 AM

Great Job! I have been wanting to make a sled for my table saw. Can you e-mail me the plans?
[email protected] Nicely done!

-- Dave Peura

View AKSteve's profile


475 posts in 3545 days

#3 posted 09-28-2014 03:10 AM

Dpeura06, just sent you an email.

-- Steve - Wasilla, Alaska

View jeff's profile


1386 posts in 4707 days

#4 posted 09-28-2014 05:33 AM

Nicely done…

-- Jeff,Tucson,Az.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics