Walnut Tray

  • Advertise with us
Project by jdevarennes posted 09-15-2014 04:07 PM 1359 views 3 times favorited 9 comments Add to Favorites Watch
Walnut Tray
Walnut Tray No picture No picture No picture No picture No picture
Zoom Pictures

This is my first project post on LumberJocks. A simple little walnut tray with handles from Lee Valley.

9 comments so far

View Mr M's Woodshop's profile

Mr M's Woodshop

426 posts in 3914 days

#1 posted 09-15-2014 05:11 PM

Simple but effective, I would say. It’ll carry a decanter of my favorite liquid refreshment, I’m certain!

Welcome to LumberJocks!

-- Henry Mowry, Santa Clarita, CA,

View RussInMichigan's profile


600 posts in 3628 days

#2 posted 09-15-2014 08:29 PM

Lovely tray.

Welcome fellow lumberjock

View BCDesign's profile


541 posts in 2270 days

#3 posted 09-15-2014 09:12 PM

thats a real nice tray,whats holding it together?glue?or did you use screws?

-- "The secret of getting ahead is getting started" Mark Twain

View Mean_Dean's profile


7052 posts in 3994 days

#4 posted 09-15-2014 11:54 PM

Nice looking serving tray! The handles look great, and simplified construction!

-- Dean -- "Don't give up the ship -- fight her 'till she sinks!" Capt James Lawrence USN

View Notw's profile


788 posts in 2600 days

#5 posted 09-16-2014 02:06 PM

Looks like a strong tray, well done

View helluvawreck's profile


32122 posts in 3714 days

#6 posted 09-16-2014 02:30 PM

This turned out nicely.

helluvawreck aka Charles

-- helluvawreck aka Charles,

View Sodbuster's profile


45 posts in 3898 days

#7 posted 09-16-2014 02:46 PM

What was your finish? I really like how the natural color shows thru. My few walnut projects often come out too dark. I have to do a burial flag case soon, and I’d like the color to come to just like yours.

-- M Clark, Georgia

View jdevarennes's profile


6 posts in 2375 days

#8 posted 09-16-2014 02:56 PM

Sodbuster, I used General Finishes Arm-R-Seal (Gloss). I simply wiped it on using swatches from old cotton t shirts, and used a foam brush to even out the finish in corners and along seams. 4 coats were applied, with 24 hours of drying time in between each coat.

View Sodbuster's profile


45 posts in 3898 days

#9 posted 09-19-2014 02:12 PM

Your project came out great, I’ll try it. Thanks for the reply.

-- M Clark, Georgia

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics