Designed for a kiln.

  • Advertise with us
Project by MSRiverdog posted 09-14-2014 03:33 PM 1508 views 1 time favorited 4 comments Add to Favorites Watch

This cart is made for a kiln for jewelry projects. The drawers are for more heavier jewelry tools. Built from White Oak I’ve had for years, lot of figure in the raised panels and drawers.


4 comments so far

View wseand's profile


2796 posts in 3896 days

#1 posted 09-14-2014 08:44 PM

A real Beaut. Is that inlay on the front legs or a molding or am I way off, hard to see from the pic. . Either way nice touch.
Your Shepherds are beautiful.

View MSRiverdog's profile


93 posts in 4590 days

#2 posted 09-14-2014 09:34 PM

That is an inlay, not planned, accidentally stated a cut on the leg front..whoops..for the mortices that the raised panels are in, had some spalted scrap from the panel board edges and cut it to fit, continued the screw up, did the other leg and glued. I’ve gotten compliments on that touch from everyone that has seen it. :-) I’ve made a number of pieces over the years that it was planned.

Shop dogs are good but those three like to lay on the floor in the way and howl at routers, sanders, jointers and planers. Thank you, they are worth every bit of getting in the way.


View staryder's profile


174 posts in 2894 days

#3 posted 09-14-2014 10:35 PM

Beautiful Project great post Thanks for sharing….

-- Rick.... Fort Worth, Texas

View wseand's profile


2796 posts in 3896 days

#4 posted 09-14-2014 11:08 PM

Shop dogs are the best. Loving the Fish Measurers.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics