Ash Goblet

  • Advertise with us
Project by diggerdelaney posted 08-28-2014 04:32 PM 924 views 0 times favorited 1 comment Add to Favorites Watch

Made from Ash and turned from one piece. Measurements below
11 1/2” tall
2 1/2” at its widest
4” depth inside of the bowl section
1/8” thickness of the bowl tapering to a thinner lip
5/8” at the thinnest part of the stem
2” across at the base
3/162 ring thickness

Turned with bowl gauge, scrapers, hollowing tool, and spindle gauge. All sanded to 600grit. Inside the bowl was finished with sander sealer and melamine lacquer outside finished with sander sealer and buffed on a three wheel buffing system.

In the first photo there is a clip on the far side of the rim which is only there to support the rings for the photo

-- Derek, Kent, UK,

1 comment so far

View crowie's profile


3898 posts in 2800 days

#1 posted 08-29-2014 06:36 AM

Very nicely done AGAIN Derek…. this one has beautiful grain…..

-- Lifes good, Enjoy each new day...... Cheers from "On Top DownUnder" Crowie

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics