Project by DRSWoody | posted 08-24-2014 06:22 PM | 1337 views | 0 times favorited | 3 comments | ![]() |
![]() |
This is a table I built for a customer. The table has 90+ Kreg pocket screws underneath the table and 4×4 legs. The 5 ft benches and 2 ft wide chairs provided seating on all 4 sides. Table is made from cedar deck boards with the rounded edges sawn off planed and jointed. The benches and chairs are made from resawn cedar 2×4s planed and jointed.
-- R. Smith Central Iowa
3 comments so far
Jim Jakosh
home | projects | blog
27807 posts in 4599 days
#1 posted 09-03-2014 03:47 PM
Great looking table and chairs!!!!!!!!!!!!
fine job you did on design and building!!
-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!
DRSWoody
home | projects | blog
67 posts in 2873 days
#2 posted 08-11-2021 11:42 PM
Thankx for the comments Jim. I should mention the house next door with the need for a paint job or or re siding siding job. Is the customer’s neighbor not mine. I was a residing contractor at the time and took a run at him but he was a renter and the landlord was’t interested. I got a lot of the the residing jobs but not all.
-- R. Smith Central Iowa
DRSWoody
home | projects | blog
67 posts in 2873 days
#3 posted 08-11-2021 11:51 PM
-- R. Smith Central Iowa
Have your say...