Oak Jewelry Box

  • Advertise with us
Project by Justin posted 08-17-2014 02:10 AM 4289 views 5 times favorited 5 comments Add to Favorites Watch

Here is a simple jewelry box I built using some 1/2” oak. Rough dimensions are 5”x10”x4-1/2” high. The bottom of the interior is covered with red felt. Used the Incra Ibox jig for the table saw for the finger/box joints.

Box is finished with a linseed oil. Think it really brought out the beauty of the oak :)

5 comments so far

View bruc101's profile


1383 posts in 4312 days

#1 posted 08-17-2014 02:48 AM

Great looking box. You do neat work.

-- Bruce Free Plans

View EdsCustomWoodCrafts's profile


932 posts in 2113 days

#2 posted 10-16-2015 04:27 PM

Hi Justin very nice box I took your design and made some adjustments, I used oak and poplar.. But i love your design and decided that it would be a cool project to do since I never have done a box joint before…

-- Thanks Ed “A bad day woodworking is better than a good day working. ~Author unknown” . Come check out my website for more about what I make and how at

View helluvawreck's profile


32122 posts in 3636 days

#3 posted 10-16-2015 07:47 PM

Wow! This is a real beauty.

helluvawreck aka Charles

-- helluvawreck aka Charles,

View greg48's profile


627 posts in 3527 days

#4 posted 10-17-2015 02:06 AM

Nice job Ed and nice to see that you have ventured into domestic hardwoods. Beware, your days with construction grade softwoods are numbered!

-- Greg, No. Cal. - "Gaudete in Domino Semper"

View Justin's profile


37 posts in 2833 days

#5 posted 10-18-2015 03:20 AM

Nice box Ed, did a great job on it. When I made the oak one I made one completely out of poplar as well. Was more of a jewelry box though.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics