Dust Collection Pipe Brackets

  • Advertise with us
Project by JSB posted 08-06-2014 04:03 AM 3676 views 16 times favorited 11 comments Add to Favorites Watch

Instead of strapping dust collection pipes to my walls I decided to make a more future friendly bracket that will use gravity to hold the pipes. They consist of two pieces of 3/8 plywood with the same radius as the 4” PVC pipe and a couple 3/4” spacers. They are really strong and I love the ease of upgrade down the road. If I ever need to change the setup by adding or moving a tool and blast gate I just lift up the pipe and modify as needed. No fussing with undoing clamps or straps.

If you would like to see a video of the build here is the link:

-- Jay -

11 comments so far

View MadWT's profile


5 posts in 2403 days

#1 posted 08-06-2014 04:22 AM

Looks good jay!

-- Romans 8:1-2

View robscastle's profile (online now)


7316 posts in 3050 days

#2 posted 08-06-2014 09:27 AM

A very practical solution, now are ther openable spots to check for a cretin blockage?

That would make a very practical installation, should even work for ceiling mounted systems just drop the mounts dow enough to allow lifting out of the piping and fittings

-- Regards Rob

View jakeprater's profile


90 posts in 2435 days

#3 posted 08-06-2014 11:47 AM

Great solution, I may have to steal this for my ducting!

-- All this sawdust.......wait........ what happened to my board???

View UpstateNYdude's profile


962 posts in 2829 days

#4 posted 08-06-2014 04:10 PM

LOL I like the part with annotation on the blade break, I had my 1” blade break the other day sawing through a 13” diameter black cheery log and I about crapped my pants so I feel your sense of fear.

-- Nick, “I am always doing what I cannot do yet, in order to learn how to do it.” – Vincent Van Gogh

View English's profile


689 posts in 2323 days

#5 posted 08-06-2014 04:37 PM

Very good design.. Thanks for sharing

-- John, Suffolk Virgina

View Backwood's profile


36 posts in 3179 days

#6 posted 08-06-2014 04:42 PM

Grizzly G0690 Table Saw? How long have you had it and how do you like it? I’m seriously considering one. Great idea with the mounts, by the way…I might just have to modify this idea to hang from the ceiling.

View geekwoodworker's profile


378 posts in 2306 days

#7 posted 08-06-2014 09:58 PM

I love your design and will be stealing it for my shop. Already downloaded the template. Love your videos Jay.

Hope to see lots of shop upgrades and jigs for the new shop in future videos.


View trees2pens's profile


160 posts in 2474 days

#8 posted 08-06-2014 11:33 PM

Very smart design, on Earth gravity is nice to use. And it’s free.

-- When All Else Fails ... Hit Delete

View punk's profile


181 posts in 3262 days

#9 posted 08-07-2014 12:17 AM

I like it nice and neat but practile

-- Punk in PA

View Roger's profile


21030 posts in 3650 days

#10 posted 08-07-2014 12:33 PM

Good stuff Jay. I like simplicity of this. I like that cordless nailer you have there. Can you elaborate on that a bit? Thnx in advance.

-- Roger from KY. Work/Play/Travel Safe. Keep your dust collector fed. [email protected]

View SPalm's profile


5336 posts in 4728 days

#11 posted 08-07-2014 07:52 PM

Thanks. Nice work.
Dang, I got to get my flex pipe off the floor.


-- -- I'm no rocket surgeon

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics