LumberJocks Woodworking Forum banner

Project Information

Here is the larger rack I made for my friend at work. It includes shaker pegs at the bottom for bracelets and necklaces. I used keyhole slots in the back to mount on the wall. At 1/4" thick, the slats were deemed a little too thick, so they will be a little thinner on the next version. Second picture is unfinished before I mounted the pegs. The frame is secured with half lap joints, and the ear ring slats fit in recessed dadoes.

Gallery

Comments

· Registered
Joined
·
4,567 Posts
Cool, Pete…..................Jim
 
Top