Oak Humidor

  • Advertise with us
Project by Mikesawdust posted 06-30-2014 05:59 AM 1408 views 1 time favorited 1 comment Add to Favorites Watch

This was a quick build but interesting. I used Oak for the sides and top, with Wenge’ for the edging. The top was lasered out and liner of spanish cedar added. I still have to put in glass, it’s engraved and I had a piece of thin plywood laser cut to frame the inside edges of the glass where I will use caulk to seal. I also used a locking miter joint on the corners for this build, it makes glueup and squaring so much easier.

-- You never cut a piece to short, you are just prepping that piece for a future project

1 comment so far

View GeneR's profile


151 posts in 2388 days

#1 posted 06-30-2014 07:15 PM

very nice! a Humidor is definitely on my long list of projects to build. Don’t know if I will ever get to it though.

Great job and thanks for sharing.

-- Failure is always an option. :-)

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics