Dinning Room Table and Bench

  • Advertise with us
Project by AUPilot posted 06-30-2014 05:02 AM 1145 views 0 times favorited 2 comments Add to Favorites Watch

This is my dinning room table i made during spring break from college. I am not really sure why the last two images are displayed sideways but whatever. The wood is walnut and poplar. The table is mortise and tenon on the apron boards and the top is tongue and groove. I used a tongue oil finish on the wood (waterlox original finish). I recommend using waterlox over poly it gives the wood a much smoother, harder, and longer lasting finish. I put about 6 coats of finish on the top of this table and bench sanding between every 2 coats. The bench is made out of walnut and poplar as well. For the bench i did pocket screws and glue and the top is tongue and groove on the end pieces.

2 comments so far

View Ivan's profile


15952 posts in 3640 days

#1 posted 06-30-2014 05:14 AM

Nice boards nice finish!

-- Ivan, Croatia, Wooddicted

View bowtie's profile


990 posts in 3118 days

#2 posted 06-30-2014 10:13 AM

very nice!

-- bowtie,.....jus passin thru....

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics