Small bathroom cabinet

  • Advertise with us
Project by LueyD posted 06-26-2014 09:09 PM 1285 views 1 time favorited 2 comments Add to Favorites Watch

This is my first attempt at making a cabinet box. I used oak plywood with walnut for the outside trim. I stained in Early American as that is what my husband wanted. I put 2 coats of poly since it could be splashed with water. The colors all seem to match that you can’t really see the differences between the different woods. It’s heavy so I put the cleat on the inside of the box, and so it will fit flat against the wall. The insert on the lid was supposed to be a flat piece of wood but I wanted something a little different. My husband cut my plastic and then sanded it for that frosty look and I cut the fencing part to put inside next to the plastic. Funny thing, I made the cut large enough to hold both. I used my KREG jig for the doors, router and table saws, simple screws on the sides, and the air gun for the assembly of the box itself. I’m trying to see which way I like not only the ease of assembly but the looks.

-- LueyD

2 comments so far

View JoeRPhilly's profile


176 posts in 3005 days

#1 posted 06-27-2014 01:52 PM

Nice job, looks good!

View LueyD's profile


20 posts in 2290 days

#2 posted 06-27-2014 11:53 PM


-- LueyD

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics