Walnut and marble chip and dip bowl

  • Advertise with us
Project by jasonborthwick posted 06-22-2014 04:45 AM 1337 views 4 times favorited 4 comments Add to Favorites Watch

This project is my first chip and dip bowl. It is walnut 2.5 in tall x 10 in wide. Finish is food safe bee’s wax/ mineral oil. The marble is a project pack piece from woodcraft , the recess for it sits a 1/2 in from the lip of the bowl.

4 comments so far

View aussiedave's profile


3114 posts in 2591 days

#1 posted 06-22-2014 10:34 AM

Very nice chip and dip bowl, nicely turned and beautiful piece of walnut…thanks for sharing.

-- Dave.......If at first you don’t succeed redefine success....

View NormG's profile


6506 posts in 3771 days

#2 posted 06-22-2014 07:19 PM

Well done bowl

-- Norman - I never never make a mistake, I just change the design.

View Hawaiilad's profile


3374 posts in 3788 days

#3 posted 06-22-2014 08:54 PM

Very nice. Was this made on your lathe or with a router?

-- Larry in Hawaii,

View jasonborthwick's profile


121 posts in 2406 days

#4 posted 06-23-2014 03:04 AM

All thanks for the comments.
Hawaiilad the bowl was turned on my Nova DVR Lathe. It was roughed out with a faceplate attached and then reverse mounted with a tenon in my chuck to hollow out and shape the inside. Once the bowl was finish sanded the tenon was turned away to provide a flat bottom for stability while in use.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics