router mortising jig

  • Advertise with us
Project by ezek1el posted 06-12-2014 10:04 PM 3617 views 9 times favorited 4 comments Add to Favorites Watch

Making mortise with good plunge router bits is the way to go but its hard to make repeative and accurate mortise with a router if you dont have an ajustable jig. So I made this jig out of some russian birch that I had laying around, and made couple upgrade lately at first I had toggle clamps holding the stock but I didnt like to reajust every time for different stock thicknesses so I put on those shop made clamps that a friend of mine gave me and as simple to make than to use. The only other upgrade I would make on it would where the fence of the router base is and replace it with a shaft and mount linear bearings but it works just fine! Its one of those jig that took me a long time before I took the time to make it but now im so glad I took the time to make it. cheers

4 comments so far

View grantd's profile


113 posts in 2330 days

#1 posted 06-13-2014 01:15 PM

looks like a really functional well built project. Good job. I must point out though that those cauls appear to have a bit of a phallic influence to them.

View helluvawreck's profile


32122 posts in 3714 days

#2 posted 06-13-2014 04:39 PM

It’s well done and a nice addition to your shop.

helluvawreck aka Charles

-- helluvawreck aka Charles,

View geekwoodworker's profile


378 posts in 2307 days

#3 posted 06-13-2014 09:46 PM

I love your shop made clamps. You must have some really nice friends.

Nice build.

View Ivan's profile


16217 posts in 3715 days

#4 posted 06-14-2014 06:44 AM

Really proffesional work!

-- Ivan, Croatia, Wooddicted

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics