| Project by tonybrews | posted 06-08-2014 03:36 PM | 1716 views | 1 time favorited | 4 comments |  |
 |
A friend at work wanted a beer tap handle as a gift for one of his friends. He asked for a Bronco theme, and this is what I came up with for him. The logo was done with an ink jet printer onto “waxed” paper using the WWMM method (thanks Steve!). The football was quite a challenge, since I didn’t have one to go by. I’m not real thrilled about the shape, but it looks pretty good. The laces on the ball are small strips of masking tape, then coated with 6 coats of CA. The handle is Maple, and the football is Ipe. Any feedback would be appreciated.
-- Tony, Colorado, [email protected]
4 comments so far
Thewoodman2000
home | projects | blog
822 posts in 2750 days
#1 posted 06-08-2014 09:11 PM
very nice job on the LOGO! hope you had the dust mask on with the IPE. that stuff gets to me that’s for sure.
I really like the overall look of this piece.
-- (the only thing in there she says is....tap on head..........tap..........tap..... saw dust) - James www.etsy.com/shop/ZionsWoodnCrafts
Bieser
home | projects | blog
176 posts in 2814 days
#2 posted 06-09-2014 02:21 AM
Go Broncos!
Bieser
home | projects | blog
176 posts in 2814 days
#3 posted 06-09-2014 02:21 AM
Go Broncos!
Roger
home | projects | blog
21030 posts in 3584 days
#4 posted 06-11-2014 12:52 PM
This is way cool Tony. Super job.
-- Roger from KY. Work/Play/Travel Safe. Keep your dust collector fed. [email protected]
Have your say...