| Project by WisconsinWoodsman | posted 06-06-2014 03:46 PM | 1151 views | 0 times favorited | 2 comments |  |
 |
I made this shelf to fit in an in-wall recess in the kitchen for my mother. The wood is hard maple and the back is Baltic birch plywood. I joined the outer case with pocket hole screws and drill the holes with a kreg shelving pin jig. I made the trim out of hard maple scrap I resawed on the table saw and used an 1/8” round over bit. The finish is lightly tinted shellac with transtint dye. I Like how it turned out and so did my parents! Let me know if you have any questions!
-- Finally, be strong in the Lord and in the strength of His might. Put on the full armor of God, so that you will be able to stand firm against the schemes of the devil. -Ephesians 6:10-11
2 comments so far
helluvawreck
home | projects | blog
32122 posts in 3646 days
#1 posted 06-06-2014 06:55 PM
Nice work and very practical.
helluvawreck aka Charles
http://woodworkingexpo.wordpress.com
-- helluvawreck aka Charles, http://woodworkingexpo.wordpress.com
WisconsinWoodsman
home | projects | blog
48 posts in 2766 days
#2 posted 06-07-2014 09:40 PM
Thank you very much, didn’t plan on making it just got asked about where my mom was going to put stuff and bang I was working on making it 30 minutes later :)
-- Finally, be strong in the Lord and in the strength of His might. Put on the full armor of God, so that you will be able to stand firm against the schemes of the devil. -Ephesians 6:10-11
Have your say...