Introducing Box Jawz (and Frame Jawz)

  • Advertise with us
Project by newTim posted 06-02-2014 01:00 AM 13246 views 36 times favorited 8 comments Add to Favorites Watch

This is a box and/or framing jig I designed over a year ago and have been using it since. It has come in handy as a holding device, clamping and squaring jig, and third, fourth, and fifth hand. I’ve made several sizes and added vertical attachments (not shown). With a little bit of study you can see the simplicity of the idea via the photos. Just route a 1/4” channel down the middle of each 2”x3/4” MDF L shaped bracket and add another 1/2” channel also down the middle for the recessed head of a T-bolt and viola. You can cut small square blocks to fit under the corners for support and to square frames, and add vertical L shaped metal or wood brackets to clamp tall pieces.

-- tim hill

8 comments so far

View HerbW's profile


25 posts in 3970 days

#1 posted 06-02-2014 01:19 AM

These are cool. Thanks

View DIYaholic's profile


19921 posts in 3956 days

#2 posted 06-02-2014 03:46 AM

Adjustable for both length & width….
You deserve a Guinness!!!

-- Randy-- I may not be good...but I am slow! If good things come to those who wait.... Why is procrastination a bad thing?

View wseand's profile


2796 posts in 4322 days

#3 posted 06-02-2014 04:10 AM

Hell of a Jig Tim.

Fav. For Sure

Thanks for sharing,\

View DominicsWoodworks's profile


19 posts in 2783 days

#4 posted 06-02-2014 06:15 AM

Looks like a nifty jig. I will keep it in mind in case I need something like that, and I would not be surprised if I did. Thanks for sharing!

-- Dominic's Woodworks -

View stefang's profile


17040 posts in 4615 days

#5 posted 06-02-2014 10:25 AM

Pretty neat and nicely done.

-- Mike, an American living in Norway.

View Roger's profile


21055 posts in 4085 days

#6 posted 06-02-2014 10:50 AM

Looks like a nice extra set of hands.

-- Roger from KY. Work/Play/Travel Safe. Keep your dust collector fed. [email protected]

View hotncold's profile


788 posts in 2825 days

#7 posted 06-02-2014 01:50 PM

Nice jigs make the world go round!

-- Dennie - Tennessee

View woodsmithshop's profile


1425 posts in 4826 days

#8 posted 06-02-2014 03:48 PM

looks like a real handy jig.

-- Smitty!!!

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics