Rolling plywood rack

  • Advertise with us
Project by ADHDan posted 05-29-2014 02:28 PM 2995 views 7 times favorited 1 comment Add to Favorites Watch

Taking my cue from Roger ( ), I built a rolling plywood cart from scraps. I had several sheets of particle board leftover from a roofing project and plenty of BC ply scrap, and I already had one Harbor Freight furniture dolly, so my total cost was maybe $20 for two more furniture dollies (I wanted an extra set of wheels and support). I also drilled holes and used bungee cords to secure tall pieces of ply, since the front is relatively short.

It’s not much to look at but it saves a ton of space in my fairly small shop. I’ll post some more recent pics shortly with the bungee cords and the third set of wheels.

-- Dan in Minneapolis, woodworking since 11/11.

1 comment so far

View whitebeast88's profile


4128 posts in 3043 days

#1 posted 05-30-2014 11:06 PM

great looking sheet holder.thanks for sharing!!

-- Marty.Athens,AL

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics