End grain Cutting Board

  • Advertise with us
Project by JobroJosh posted 05-05-2014 01:48 PM 796 views 0 times favorited 1 comment Add to Favorites Watch

I made a cutting board for a school project. I started off by grabbing cherry, oak, walnut and maple and making them 20 inches in length and they had to equal 8 inches in width put together. Once I found all of my wood I glued them together and clamped them. I then trimmed the edges down and put it through a planer. After I planed it I cut it into strips and reglued it flipping every other strip. I then sanded it with a belt sander and after that the drum sander. Following that I routed all my sides and rounded the edges with the disk sander. I then put on mineral oil so food and other things can be cut on it

1 comment so far

View Ken90712's profile


17902 posts in 4045 days

#1 posted 05-05-2014 01:51 PM

Great looking board… well done…

-- Ken, "Everyday above ground is a good day!"

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics