LumberJocks

Wooden bracket

  • Advertise with us
Project by TheBeardedWoodworker posted 04-23-2014 01:57 PM 1779 views 0 times favorited 5 comments Add to Favorites Watch
Wooden bracket
Wooden bracket No picture No picture No picture No picture No picture
Zoom Pictures

I don’t like putting holes in my studs, so this was my solution.

-- The Bearded Woodworker from Brander's WoodShop (https://www.facebook.com/BrandersWoodshop) a part of The Maritime Woodworkers (www.maritimewoodworkers.com)





5 comments so far

View ohwoodeye's profile

ohwoodeye

2168 posts in 3486 days


#1 posted 04-23-2014 02:08 PM

Not sure this is OSHA approved or UL or the PTA or the KGB etc.

-- "Fine Woodworking" is the name given to a project that takes 3 times longer than normal to finish because you used hand tools instead of power tools. ----Mike, Waukesha, WI

View KnotCurser's profile

KnotCurser

2031 posts in 3401 days


#2 posted 04-23-2014 03:18 PM

Wait just a second…... to attach the hanger you put two holes into the studs, right?

Just sayin.

-bob

-- Robert Rhoades WoodWorks / Email: [email protected] / www.rhoadesclan.com

View Jasonjenkins's profile

Jasonjenkins

44 posts in 1935 days


#3 posted 04-23-2014 04:59 PM

Yeah but its a screw hole. not a 2” hole to jam a power strip through. i think thats what he means? Sometimes the mounting options on the back of a strip just dont work out. I have mounted one to a 2×4 and then screwed THAT to the studs…

-- Growing a full beard is proven to instantly improve your handtool skills...

View TheBeardedWoodworker's profile

TheBeardedWoodworker

17 posts in 1827 days


#4 posted 04-23-2014 07:27 PM

Ha! Good one Bob.

-- The Bearded Woodworker from Brander's WoodShop (https://www.facebook.com/BrandersWoodshop) a part of The Maritime Woodworkers (www.maritimewoodworkers.com)

View TheBeardedWoodworker's profile

TheBeardedWoodworker

17 posts in 1827 days


#5 posted 04-23-2014 07:29 PM

Jason you are correct.

And oddly enough the power strip doesn’t have any mounting holes on the back of it… My options seemed to be to leave it loose on the back of the bench or come up with something creative.

-- The Bearded Woodworker from Brander's WoodShop (https://www.facebook.com/BrandersWoodshop) a part of The Maritime Woodworkers (www.maritimewoodworkers.com)

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com