| Project by Brianthesawdustmaker | posted 04-23-2014 01:51 AM | 2155 views | 7 times favorited | 4 comments |  |
 |
This plant stand is constructed of red oak. I saw a similar stand at a friends house and decided to make a couple. I cut the notches via bandsaw as well as the ratchet piece and the stabilizing piece on the bottom. There is a dowel which allows the ratchet to swing. There is no hardware in this project… Only wood glue. The middle sections are 1 1/2” square and they fit into square jokes on the base and top.
Finished with 50:50 minwax 210 b and 211 with clear satin poly (2 coats).
A pretty easy little project and a unique way to design a useful product. Hope you guys like it!
-- Brian, Omaha, NE... So many projects, so little time!
4 comments so far
irtamos
home | projects | blog
286 posts in 2433 days
#1 posted 04-23-2014 06:21 AM
Well done!
-- irtamos, Belgium
Ken90712
home | projects | blog
17671 posts in 3578 days
#2 posted 04-23-2014 09:59 AM
Nice work, great idea
-- Ken, "Everyday above ground is a good day!"
Jordan
home | projects | blog
20 posts in 2460 days
#3 posted 04-23-2014 05:22 PM
Cool! Reminds me of an Ellis Shore.
-- Jordan, BC
Sergio
home | projects | blog
470 posts in 3082 days
#4 posted 04-23-2014 05:26 PM
That could be used for an adjustable stool :)
-- - Greetings from Brazil - --
Have your say...