The common LJ out feed table

  • Advertise with us
Project by Jeffups posted 04-22-2014 03:09 AM 3371 views 21 times favorited 9 comments Add to Favorites Watch

Well after about a year of looking at this idea on the internet and LJ, I finally figured out how to adapt this to my delta table saw. I know it’s been posted a lot on LJ, but I thought it may help give someone another idea or inspiration. All the material I used was scraps I had laying around in my show from commissioned projects, so it didn’t cost but $5 for some hardware. It truly was a fun project to build. It gave me the opportunity for a challenge, and to make it mechanical and functional. It has already been worth it’s weight in gold. Don’t know how I got by without it. Thanks for looking and I hope it helps someone.

-- I have to remember this is a hobby..

9 comments so far

View Tooch's profile


2013 posts in 2724 days

#1 posted 04-22-2014 03:11 AM

nice work. any outfeed table is a good outfeed table… the fact that this one moves makes it that much better!

-- "Well, the world needs ditch-diggers too..." - Judge Smails

View Warner's profile


34 posts in 2429 days

#2 posted 04-22-2014 08:54 AM

This looks great! I have the same saw and have been thinking about building an outfeed table for it. I think I will have to try this one.

-- Flint Hills, Kansas

View Gianni's profile


232 posts in 2822 days

#3 posted 04-22-2014 11:52 AM

I’ve been putting this off for too long. Time to build one for myself.

Noticed you didn’t cut the miter slots – is that coming, or unnecessary on your saw?

View adrianpglover's profile


60 posts in 2371 days

#4 posted 04-22-2014 11:56 AM

I’ve been putting one off myself. I’d really like to make a roller version of this, but am currently searching for a source for cheap rolling pins.

View Jeffups's profile


77 posts in 2690 days

#5 posted 04-22-2014 12:03 PM

Gianni I still need to get the miter slots put in. Just haven’t needed them yet.

-- I have to remember this is a hobby..

View MT_Stringer's profile


3183 posts in 4079 days

#6 posted 04-22-2014 05:04 PM

Looks very nice.

Is your saw heavy enough to support the weight of your workpiece piece as it passes through the blade without tipping over?

-- Handcrafted by Mike Henderson - Channelview, Texas

View Ken90712's profile


17902 posts in 4037 days

#7 posted 04-22-2014 05:35 PM

Wow really nice. Love it….

-- Ken, "Everyday above ground is a good day!"

View Cruiszr's profile


88 posts in 2440 days

#8 posted 04-22-2014 10:03 PM

Looks like it will serve you well. I too have a Delta TS that I want to add a fixed outfeed table to. It’s going to be more of a challenge because it has the outboard motor. Now that I just completed my outside storage area for my compressor and propane tank it’s the next project for the workshop on my list.

-- George R. Forest, Virginia

View WoodenDreams's profile


1120 posts in 759 days

#9 posted 01-28-2020 06:12 PM

nice collapsable outfeed table. Would it been better to have the leg go to the floor to prevent tippyness with heavy stock gone through.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics